11 May, 23

How To Spray Paint Car With Aerosol Cans For That Professional Finish

Spray paint car with aerosol cans is not advised for professionals.
However, the aerosol can is a very practical alternative for many part-time sprayers who are simply fixing their own cars on a Saturday morning, and by following our guidelines, you can achieve a very good finish and colour match.
Follow the instructions below, then share your results in the comments section.

The key is preparation

Patience and preparation are two things that are vitally essential to getting a flawless paint finish.
Remove the portion of the automobile you wish to paint first, if at all feasible. Spraying directly onto a part is simpler than attempting to do it while the part is still fastened to the car; you’ll also need to perform less masking.
Another advantage of having the item laid flat in a work area is that it is less likely that the paint will run.
Remove any products with silicon in them from the painting area. Some car care items, such as “Son of a Gun” or waxes and polishes containing silicone, could damage your paint job just by being in the same room! Visually evaluate the surface you are painting with great care, In addition, you should run your finger over the surface to check for any flaws.

Use water and fine wet and dry sandpaper to smooth out any blemishes.
It’s crucial to have a completely flat surface before applying any primer.
Don’t fall for the myth that little blemishes or scratches will be hidden by the paint; they won’t! Use paper and masking tape to block off any parts that you don’t want the paint to cover on larger surfaces.
Since paint can spread quite far, cover a bigger area than you initially thought was necessary.
Finally, clean the surface you want to paint by wiping it down with a cleaning agent like gasoline or thinner to get rid of any remaining oily substances. Even the grease on your hands may degrade the paint surface.

The Painting Surface’s Primer

You have a wide variety of primers to pick from. White primer, plastic, red oxide, and gray are a few of the most popular ones.
A nice option is a plastic primer since it is made to be used with spray paint on flexible plastic objects and bends with the surface of the plastic to keep the paint from splitting.
For a few minutes, shake the container vigorously before applying primer.
Ideal conditions call for the can to be at room temperature (keep it inside the house overnight before painting).
Spray only a small dusting of primer across the surface using a smooth, back-and-forth motion while keeping the paint can about 10 to 12 inches away from the surface.

Don’t just skim the surface

Repeat the technique after giving your portion 5 to 10 minutes to dry.
After moving the component, alter your direction as before.
At least five to six thin coats of primer should be applied.
If there are any flaws that you can notice, sand them out using the finest grade of wet and dry sandpaper. Apply a few more coats of primer after that.

It’s time to spray paint car now

The most rewarding part of it is right here. The application process is the same as the priming process. You want to apply many thin layers rather than one big, hefty one.
The distinction between flat and metallic paints is the most crucial point to make in this instance.
To get the ideal glossy surface, metallic paints and clear lacquer are a MUST.
Since a flat or standard paint colour has at least 8 layers of paint, lacquer is not necessary.

Use lacquer to create a glossy finish

The only paints that require a clear lacquer are metallic ones.
It is applied in precisely the same manner as paint and primer: in a number of thin coats.
The paint beneath is shielded and given a shine by the lacquer.
The true secret to getting a flawless finish with all the aforementioned labor is patience.
If you are prepared to put in the necessary time and effort, it is feasible to get the ideal finish for a small portion of the cost that a skilled automobile paint sprayer would charge.
It’s your time now, so go ahead and spray paint car. To achieve that professional finish, use aerosol cans. You can always sand it down and try again if things don’t work out as you had hoped. Alternatively, you can get in touch with us at BodyTeq for a quote on car scratch repair.

Read more: Different Car Paint Types & Finishes That Work Best For You

How to maintain your car’s paint

Maintaining your car’s paint is essential to keep it looking new and protecting it from damage. Here are some tips for maintaining your car’s paint:

  • Wash your car regularly: Regular washing helps to remove dirt, grime, and other contaminants that can damage your car’s paint. Use a gentle car wash soap and a soft sponge or microfiber towel to avoid scratching the paint.
  • Wax your car: Waxing helps to protect your car’s paint from the elements, such as UV rays, bird droppings, and tree sap. Apply a high-quality car wax every few months to keep your car’s paint looking new and shiny.
  • Avoid parking in the sun: Parking your car in direct sunlight can cause the paint to fade and crack over time. If possible, park your car in a shaded area or use a car cover to protect it from the sun’s rays.
  • Keep your car’s surface clean: In addition to regular washing, it’s important to keep your car’s surface free from contaminants, such as bird droppings, tree sap, and bugs. Use a specialized cleaner to remove these substances as soon as possible to prevent damage to the paint.
  • Avoid automatic car washes: Automatic car washes can cause scratches and swirl marks on your car’s paint. Instead, opt for a hand car wash. Or wash your car at home using a gentle soap and soft sponge or microfiber towel.
    By following these tips, you can help ensure that your car’s paint stays looking new and protects your vehicle from damage. If you’re getting sick of seeing car scratches ruining your car’s look you can take a look at Looking For Professionals In Car Scratch Repairs? Note These Things!

Leave a Reply

Your email address will not be published. Required fields are marked *